Ceiling insulation and wall insulation, are more than just a building technique measure. It is an investment in sustainability, comfort and long-term financial savings. By reducing heat loss and cold infiltration, a well-insulated building, can drastically improve energy efficiency and save on energy costs.
But there are different ways to insulate a ceiling, each method has its own advantages, disadvantages and areas of application. However, we would argue that loose-fill insulation is a better and, on top of that, cheaper solution, which saves you time when it is sprayed, costs for materials, as less material is used, and overall costs, as it is both cheaper in terms of working time and materials.
In this in-depth guide, we will take a closer look at the different aspects of ceiling insulation:
Director of Isoleringsmaskinen A/S
22.09-2023
A well-insulated building requires less energy for heating and cooling, which not only cuts energy bills but also reduces the load on the energy grid and the production of greenhouse gases.
Insulation acts as a thermal barrier that maintains a constant temperature indoors. This makes the indoor environment pleasant all year round. It not only keeps the heat from the inside in, but also the heat from the outside out.
By reducing energy consumption, insulation can help reduce a building's overall carbon footprint, which is an important factor in combating climate change.
In houses with ventilation systems, proper insulation plays an important role. Correct insulation creates conditions for a better indoor climate and helps a ventilation system to do its job more efficiently. It is
This method involves the use of pre-cut sections of mineral wool or glass wool, which, after being cut, can be rolled out between the ceiling beams. It is more suitable where the distance between the beams is standard and there is good access to the ceiling area. However, it takes a long time, both for the insulation company and the customer, because work has to be done to get the insulation to fit the various cavities.
Here, a blowing machine is used to distribute small particles of cellulose, glass wool or mineral wool over the ceiling surface. This method is especially ideal for ceilings with many obstacles such as pipes or wires, as the material can be filled around them.
But loose-fill insulation is also much faster, for standard insulation tasks, and can often cut working hours by more than 3 times. The particularly expensive thing about insulation tasks is the working hours for wages and therefore loose fill insulation can save you a lot of money.
A two-component foam is sprayed out through a hose and expands on contact with air. This creates a dense, continuous insulation barrier that is highly effective but also more costly. Foam is also particularly difficult to remove when replacing insulation.
This type of insulation uses aluminum foil to reflect radiant heat, which is particularly effective in hot climates where cooling is a primary concern. This is not really used at home, as the purpose here is to ensure that heat is reflected back and maintains a high heat level. It is often used for plant rooms and in large industrial greenhouses.
Initial costs can be a barrier, but over time the savings on energy bills will often justify the investment.
Therefore, it is important for the consumer to know that correct insulation is an investment over time that pays off. Because spray insulation can be done much faster, it takes less time for the costs to be covered for the consumer and the savings are made.
Insulation materials are made from products that are not intended for direct contact with the skin and particles in the air should not be inhaled. Therefore, correct protective equipment and use is important.
During installation, protective clothing that covers direct contact with the skin, also known as PPE equipment, should be worn. A mask must be worn and here we recommend a mask with a P100 filter.
Improper installation can lead to uneven insulation, which can result in thermal bridges where heat can escape more easily. Therefore, we train our insulation customers in the correct use of the machine, if the need arises for this.
With spray insulation, there is a lower chance of gaps where there is no insulation, as the loose fill spreads and lays down in an even layer, where you can quickly see where additional insulation material is missing.
Spray insulation is a relatively easy method to learn. Therefore, it can be carried out by private individuals who rent a machine, with proper training in protection.
Regulations and Permits: It is essential to know and comply with local building codes. Failure to do so may result in having to remove and reinstall the insulation.
The ISOPRO machines are the cheapest machines on the market, sometimes half as cheap as similar machines and produced in Denmark.
In addition, we offer training in the correct use of the machine and are ready to offer support, advice and are never far away from servicing our customers.
Attic insulation is a complex process that requires a technical and physical understanding of the many factors that affect a building's energy efficiency and thermal comfort. From material selection to installation techniques, there are several considerations that can make the difference between a mediocre and an excellent insulation solution. When properly implemented, attic insulation is one of the most effective ways to improve a building's energy profile, while contributing to a more sustainable and comfortable living and working environment.
Ceiling insulation should be carried out by professional professionals, with the right know-how and experience in insulation, but as a minimum they should be brought on board as advisors on ceiling insulation projects.
Loose-fill insulation is the cheapest method, as the time consumption and working hours spent on the task is by far the cheapest alternative.
We offer leasing of machines, which makes your initial cost for our efficient machines even lower and ensures that you can offer your customers competitive prices for installation, with the same high quality.
Are you still in doubt about something?
Still stuck with a question? Then you are very welcome to contact us by phone: +45 31 36 62 86, or send an email to iso@isoleringsmaskinen.dk
You can also fill out our form by clicking the button below.
Isolingsmaschinen A/S was founded in 2012, with a strong focus on efficiency, strength and ease of use. The models include IsoPro1 300/1000/2800 and 4000 – so there is an insulation machine for every need. Also remember our insulation vacuum cleaner; IsoPro1 VAC
Isoleringsmaskinen
Looking for something?
Isoleringsmaskinen A/S
Smedevej 24 / DK-4180 Sorø / Denmark
iso@isoleringsmaskinen.dk
Sales and service: (+45) 31 36 62 86
CVR no. (DK) 39 11 86 45
Development and Design by: Wuo.dk
